Skip to content

Stories

Eliminate Leak to Improve Vacuum

Helping Made In America, one shop at a time.

This Northern Nevada customer was so happy with the Laguna Tools CNC Router they had been using for all these years, that they recently added a 2nd Laguna to the shop for more capacity. As happy as they are with their machines, work-holding with vacuum can still prove problematic on some parts. So they welcomed us in and gave us an Inside Look at how they are making (and holding) their parts.

First we checked (and replaced) the Grid Gasketing (our P/N UMG 25 312) in the table. This helped. Then we looked at to vacuum the parts. For his particular shop, we created a special fixture with three individual zones using Tile Gasketing (our P/N TG CR 06). Massive improvement in vacuum system effectiveness after those few small adjustments. Yes, they could have ran the job without our assistance. But after we made these changes, same jobs were running in less time, less waste, less steps and less headaches.

Hold It Better.
Cut It Better.
Profit Better.

To the next Made In America shop that is out there working so hard to make YOUR parts as best you can, as quickly as you can, as efficiently as you can, we look forward to working with you one day….

On Board Gasket can be used directly on a spoil board.

Tile Gasket a great option for universal parts. It is applied directly to the spoilboard.

It is quick and easy to adjust your Z for Tile Gasket

Quickly apply Tile Gasket. It increases the holding power of your Vacuum and prolongs the life of your spoilboard.

Table Gasket is like the lip of the freezer door.

    Contact All Star CNC

    Contact Us
    The First in CNC Vacuum Gaskets and Vacuum
    Clamping Techniques
    13355 Grass Valley Ave Suite B
    Grass Valley, CA 95945
    ©2023 All Star CNC Products Inc. All Rights Reserved.